Faber 90 cm Chimney & Hood TENDER 3D T2S2 LTW 90 MAX Stainless steel conical finish, 3 layer baffle filter, push button control
If you need futher guidance regarding various things to consider while purchasing Chimney & Hood, please read our Conzumr Guide
Type | Wall Mounted - Hood/ Canopy |
Wall Mounted - Hood/ Canopy: They are the most common hoods. They are fixed onto the wall and the hood or canopy hangs above the stove to catch fumes. It comes in various styles and designs. | |
Outlet Type | Ducted |
There are two types of outlets | |
Air Suction Capacity | 1295 m3/h |
Air Suction Capacity is the motor’s capacity to absorb the odor and oily vapor and is measured as m3 per hour. A higher suction capacity is needed where a lot of frying is involved. Homes associated with normal frying requires upto 400 cubic meter per hour capacity's chimney. | |
Width | 90 cm |
The hood or canopy size depends on the size of the kitchen. Normally a 2 to 4 burner stove/ hob requires a 2 ft chimney whereas a 3 to 5 burner require a 3 ft one. But to absorb maximum fumes or smoke, a chimney should cover the entire gas stove otherwise the heat, smoke or fumes will move out of the canopy area and cannot solve the desired purpose of a chimney. | |
Body Material | Stainless steel conical finish |
Warranty(Months) | LifeTime |
Warranty Terms | Lifetime warranty |
Available on Conzumr Since | April 2018 |
16875.00 16398.25 4 | |
Croma | ₹ 16875 SELL INR 16875.00 30% off |
Amazon.in | |
Faber | ₹ 23990 SELL INR 23990.00 |
FlipKart | ₹ 16398.25 OUTOFSTOCK INR 16398.25 32% off |
Refreshed 1 week ago |
Type | Wall Mounted - Hood/ Canopy |
Wall Mounted - Hood/ Canopy: They are the most common hoods. They are fixed onto the wall and the hood or canopy hangs above the stove to catch fumes. It comes in various styles and designs. | |
Outlet Type | Ducted |
There are two types of outlets | |
Width | 90 cm |
The hood or canopy size depends on the size of the kitchen. Normally a 2 to 4 burner stove/ hob requires a 2 ft chimney whereas a 3 to 5 burner require a 3 ft one. But to absorb maximum fumes or smoke, a chimney should cover the entire gas stove otherwise the heat, smoke or fumes will move out of the canopy area and cannot solve the desired purpose of a chimney. | |
Body Material | Stainless steel conical finish |
Color | Silver |
Controls | Soft touch push button control |
There are 3 types of controls |
Air Suction Capacity | 1295 m3/h |
Air Suction Capacity is the motor’s capacity to absorb the odor and oily vapor and is measured as m3 per hour. A higher suction capacity is needed where a lot of frying is involved. Homes associated with normal frying requires upto 400 cubic meter per hour capacity's chimney. | |
Speed Levels | 3 |
Noise Levels | 68 dB |
Number of Lamps | 2 |
Lamp Wattage | 5 W |
Lamps | CFL lamp |
Filter | Baffle filter |
|