Canon Camera EOS 70D (EF-S18-55 IS STM) (EOS 70D Kit (EF-S18-55 IS STM) Body Only (Black))
Dual Pixel CMOS AF, DIGIC 5+ image processor & 20.2M APS-C CMOS sensor, 19-point cross type AF & 7.0 fps Continuous Burst Shooting
|Lens||EF-S18-55 IS STM|
|Camera Effective Pixels||20.2 MP|
|Recording Media||SD, SDHC, SDXC|
|Available on Conzumr Since||October 2016|
|78853.00 85994.00 7|
|SnapDeal||₹ 78853 SELL INR 78853.00 3% off|
|Canon||₹ 80995 SELL INR 80995.00|
|Infibeam||₹ 80995 SELL INR 80995.00|
|Shopclues||₹ 81700 SELL INR 81700.00|
|Paytm Mall||₹ 63798 OUTOFSTOCK INR 63798.00 21% off|
|FlipKart||₹ 80595 OUTOFSTOCK INR 80595.00|
|Refreshed 6 months ago|
|Best suited for||Semi-Professional|
|Lens||EF-S18-55 IS STM|
|Lens Aperture||EF-S18-55 IS STM|
These are different aperture values f/1.4, f/2, f/2.8, f/4, f/5.6, f/8 (high to low) It is calibrated in f/stops and is generally written as numbers such as 1.4, 2, 2.8, 4, 5.6, 8, 11 and 16. The lower f/stops give more exposure because they represent the larger apertures, while the higher f/stops give less exposure because they represent smaller apertures.
A lens that has an aperture of f/1.2 or f/1.4 as the maximum aperture is considered to be a fast lens, because it can pass through more light. This is the reason behind using lenses with large apertures that better suits low light photography.
|Compatible Lenses||Canon EF lenses|
|Lens Mount||Canon EF mount|
A lens mount is an interface — mechanical and often also electrical — between a photographic camera body and a lens.
|Battery Type||Rechargeable lithium-ion battery|
|Rated Voltage||230 V|
|Type of Image Sensor||CMOS sensor|
|Dust Deletion Feature||Auto, Appending Dust Delete Data, Manual|
Dust Delete Data is a piece of data that is appended to the photos that are to be used for dust detection and deletion using Canon’s Digital Photo Professional application (DPP) provided on the disk that comes with your Canon 70D. It maps the spots where dust is detected and writes the size and location to the appended data file for DPP to use.
|White Balance||Auto, Preset (Daylight, Shade, Cloudy, Tungsten light, White fluorescent light, Flash), Custom, Color temperature setting (approx. 2500-10000 K), White balance correction, and White balance bracketing possible|
|Colour filter system||RGB primary colour filter|
|Camera Effective Pixels||20.2 MP|
|Flash Details||Built In, FE lock, Flash coverage, Flash-ready indicator, Manual flash, Multi-flash|
|Image Sensor Size||22.5 x 15.0 mm|
|Recording Media||SD, SDHC, SDXC|
|Shutter Type||Electronically-controlled, focal-plane shutter|
Camera shutter is just like a curtain in front of the Camera sensor that remains close till the camera fires. Camera's shutter controls how long the sensor is exposed to light. It uses a pair of 'curtains' or blinds. The button that fires the camera is known as shutter or shutter button, because it triggers the shutter to open and close.
|Shutter Speeds||1/8000 sec. to 30 sec. (total shutter speed range; available range varies by shooting mode), Bulb, X-sync at 1/250 sec.|
Shutter speed also referred as exposure time is the time when the camera shutter is opened to expose sensor to the light. There are some times when you require fast speeds like sports or action photography, but there are other times that you can slow things down a little and get some very nice results indeed.
Shutter speed is generally measured in fractions of a second. Eg: 1/250 means one two-hundred-and-fiftieth of a second or four milliseconds. Most modern DSLRs cameras have shutter speeds of up to 1/4000th of a second, while some high end cameras can handle much higher speeds of 1/8000th of a second and even faster than that. The longest shutter speed on most DSLRs is typically 30 seconds i.e. without using external remote triggers.
A device on a camera showing the field of view of the lens, used in framing and focusing the picture.This is the view of the world through the camera, the small rectangle with black edges that shows you what part of the world the lens is looking at and whether it is in focus or not.
Viewfinder: The viewfinder is the only important user interface on any camera.
|Eye point (Approx)||22 mm|
|Coverage (Horizontal & Vertical) Approx||100 %|
|Magnification||Approx. 0.95x (-1m-1 with 50mm lens at infinity)|
|Built-in Dioptric Adjustment||Approx. -3.0 - +1.0 m-1 diopter|
A diopter is a setting on your camera body that adjusts the image in the viewfinder to match your eyesight.They adjust for an eye that can’t focus at a reasonable distance, such as for close objects like reading text.
|Focusing Screen||Eh-A standard screen, interchangeable|
|Interface||Audio, External Microphone IN, Eye-Fi Card, HDMI Mini OUT, Remote Control Terminal, USB Terminal, Wireless Remote Control|
|Autofocus Type||TTL secondary image-registration, phase-difference detection with the dedicated AF sensor|
|Focusing Brightness Range||EV -0.5 - 18 (with center AF point, at room temperature, ISO 100)|
|Focus Operation||One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing (MF)|
|AF-assist Beam||Small series of flashes fired by built-in flash|
Now-a-days camera comes with an autofocus assist light which helps the camera determine autofoucs in low light conditions.
|Metering Modes||63-zone TTL full-aperture metering|
The metering mode refers to the way in which a camera determines the exposure. Now-a-days camera comes with light “meter”, which is a sensor that measures the amount and intensity of light.Metering is all about how your camera determines what the correct shutter speed and aperture should be, depending on the amount of light that goes into the camera and the sensitivity of the sensor.
|Metering Brightness Range||EV 1 - 20 (at room temperature, ISO 100)|
|ISO Speed Extension settable (with C.Fn.I-3-1)||12800|
|Exposure Compensation||±5 stops in 1/3- or 1/2-stop increments|
Exposure compensation is used to alter exposure from the value selected by the camera, making photographs brighter or darker.
|AE lock (Auto)||Applied in One-Shot AF mode with evaluative metering when focus is achieved|
When you press the AE Lock button, the current exposure settings are locked so that they can’t change as you recompose the shot even if the level of light alters as you aim the camera elsewhere.
|AE lock (Manual)||By AE lock button|
|Transfer Images between Cameras||Yes|
|LCD Monitor Type||TFT|
|LCD Monitor size||3 "|
|LCD Monitor dots||1.04 M|
|AF Point Display||Yes|
|Image Browsing Methods||Single image, Jump by 10 or 100 images, By shooting date, By folder, By movies, By stills, By protected images, By rating|
|Movie Playback||Enabled (LCD monitor, HDMI OUT), Built-in speaker|
|Slide Show||All images, By date, By folder, By movies, By stills, By protected images, By rating|
|Movie Recording format||H.264 Variable (average) bit rate, MOV, MPEG-4 AVC|
|Audio Recording format||Linear PCM|
|Sound Recording||Built-in stereo microphone External stereo microphone terminal provided Sound recording level adjustable, wind filter provided, attenuator provided|
|Movie Exposure Control||Program AE (Scene Intelligent Auto, Flash Off, Creative Auto, Special scene [Portrait, Landscape, Close-up, Sports, Night Portrait, Handheld Night Scene, HDR Backlight Control], Program), Shutter-priority AE, Aperture-priority AE, Manual exposure, Bulb exposure|
|Movie Exposure Compensation||±3 stops in 1/3- or 1/2-stop increments|
|Focus Methods||Dual Pixel CMOS AF system/Contrast-detection AF system (Face+Tracking, FlexiZone-Multi, FlexiZone-Single), Phase-difference detection with the dedicated AF sensor (Quick mode), Manual focus (approx. 5x and 10x magnified view possible for focus check)|
|Metering Range||EV 0 - 20 (at room temperature, ISO 100)|
This is a technique is used to measure the brightness of the subject in front of the camera. Then the camera optimizes exposure by adjusting aperture, shutter speed, (f-number), and ISO sensitivity accordingly with the brightness of the subject, which is measured using the camera's built-in metering sensor.
|Silent Shooting||Provided (Mode 1 and 2)|
|Recording Format||Design rule for Camera File System (DCF) 2.0|
|Image Type||JPEG, RAW (14-bit, Canon original), M RAW, S RAW, RAW + JPEG|
|Picture Style||Auto, Faithful, Landscape, Monochrome, Neutral, Potrait, Standard, User Def. 1 - 3|
|Recorded Pixels Large||20 MP|
|Recorded Pixels Medium||8.9 MP|
|Recorded Pixels Raw||20 MP|
|RAW + JPEG simultaneous recording||Yes|
|Drive Modes||10-sec. delay with continuous shooting, Self-timer: 10-sec. delay/remote control, 2-sec. delay, Silent continuous shooting, Silent single shooting, Single shooting|
The drive mode function within a camera can be used to change whether your camera shoots single or multiple shots once the shutter is full depressed. It can also be used to delay the shot by waiting 2 or 10 seconds to take a photo after the shutter has been pressed.
|Flash metering||E-TTL II autoflash|
|Highlight Alert||Overexposed highlights blink|
|LCD Brightness Adjustment||Manual|
|Max Working Temperature||40 °C|
|Touch Screen Technology||Capacitive sensing|
|Post-Processing of Images||Creative filters|
|Direct Printing||Compatible Printers, Print Ordering DPOF Version 1.1 compatible, Printable Images JPEG and RAW, PictBridge-compatible printers|
|Custom Functions||Copyright Information, Custom Functions, My Menu Registration|
|Working Humidity||85 %|
|Digital Zoom||Approx. 3x-10x|
|Zoom Magnification||Approx. 1.5x - 10x|
|Zooming to Match Lens Focal Length||Yes|