Voltas DC Inverter-Executive (Hot/Cold) Split 1 TR Air Conditioner 12V E(W)-AW (1 Ton 12V E(W)-AW)

Non-Inverter AC: Non inverter or Fixed speed air conditioning deliver a fixed amount of power via a fixed speed. This means the compressor has to stop and start to maintain the desired room temperature. This means that it operates either at full or minimum speed. Switching on this type of unit will start to run on full load thus consuming more power.

Hot and Cold: There is only one motor for the fans blowing through the hot coils and cold coils. However, in split system air conditioning, you have two separate motors for the two fans. While this may seem to be a waste of energy, it also means that it is possible to have a different motor speed for the air handling or cooling unit. Thus, in the split system, the air handling motor has a variable speed and usually operates at a lower speed to save on energy costs. The speed can also be adjusted by the user to achieve the desired environment. A final advantage is the ability of a split system to serve as both an air conditioner in the summer months and a heater in the winter. This is accomplished by switching functions at the outside compressor which then functions as a heat pump. Generally, cassettes are provide less heat than is necessary, but they are a useful addition to other systems

It is a fluid that is used in refrigerators and air-conditioners to remove heat from the inside and throw it out in the atmosphere.

This is a superior type of a compressor and it compresses air in a confined space. These are more compact, operate quietly, built for continuous operation and typically see less maintenance. The down side is the initial costs are higher. For less than 3 ton these are good options as they don't need high duty cycle and have better energy ratings.

Filter helps to keep the environment clean

Evaporator fins are located on the evaporator and is function is to t extract heat from the air by thermal energy exchange process that occurs with the surrounding air. Air is blown across the evaporator fins where it is cooled and then sent from the air conditioner through ducts and vents and into various rooms.

A ton is a measurement of heat transfer. One ton is equal to 12,000 BTU's(British thermal unit) per hour. It is derived from the amount of energy that it takes to melt one ton of ice in a twenty four hour period.

Energy Efficiency cooling mode value specified by manufacturer. This is the energy efficiency calculated while using the cooling mode of the air conditioner.

1 kW = 3412.142 BTU/hr

An auto restart facility helps to restore the original setting after a power break.

The timer button on the remote automatically selects the night set mode, which prevents excessive heating/cooling of the room. The perfect temperature gives you a sound, undisturbed sleep, which keeps you healthy, fresh and ready to go the next day.