Voltas Inverter Split AC Split 1 TR Air Conditioner 125VH Crown AW (125VH Crown AW 1 Ton 5 Star)

Inverter AC:

An inverter air conditioner consumes much less electricity as compared to non-inverter. An inverter AC means that the compressor is powered by a variable speed drive, which enables the compressor to run at a range of speeds from slow to fast, to match the output required. Inverter air conditioners are able to vary their operating capacity. You would be really surprised to find the amount of money you can easily save by making use of this latest technology. When purchasing an inverter air conditioner.

There are different types on Inverter ACs like:

• DC Inverter AC - Converts AC to DC current and then back into AC current. Due to variable frequency, the compressor motor is able to work at variable speed and hence is more efficient that conventional non-inverter or fixed speed ACS.
• Inverter Heat Pump - It is an inverter AC which pumps out over 3 times more energy than the traditional heat pumps. It is mainly used in Acs which come with both hot and cold feature
• 3D Inverter AC - It is an inverter AC which has vents on the side that helps in removing hot air and calling the room faster
• Multi Inverter (Multi Split) - It is an inverter AC which is used in ACs which support different capacity and style indoor units for one single outdoor unit

Hot and Cold: There is only one motor for the fans blowing through the hot coils and cold coils. However, in split system air conditioning, you have two separate motors for the two fans. While this may seem to be a waste of energy, it also means that it is possible to have a different motor speed for the air handling or cooling unit. Thus, in the split system, the air handling motor has a variable speed and usually operates at a lower speed to save on energy costs. The speed can also be adjusted by the user to achieve the desired environment. A final advantage is the ability of a split system to serve as both an air conditioner in the summer months and a heater in the winter. This is accomplished by switching functions at the outside compressor which then functions as a heat pump. Generally, cassettes are provide less heat than is necessary, but they are a useful addition to other systems

It is a fluid that is used in refrigerators and air-conditioners to remove heat from the inside and throw it out in the atmosphere.

This is a superior type of a compressor and it compresses air in a confined space. These are more compact, operate quietly, built for continuous operation and typically see less maintenance. The down side is the initial costs are higher. For less than 3 ton these are good options as they don't need high duty cycle and have better energy ratings.

Filter helps to keep the environment clean

Evaporator fins are located on the evaporator and is function is to t extract heat from the air by thermal energy exchange process that occurs with the surrounding air. Air is blown across the evaporator fins where it is cooled and then sent from the air conditioner through ducts and vents and into various rooms.

Compressor fins are located on the outdoor portion of an air conditioner near the compressor These fins look like a grill with metal fins all along it. These air conditioner fins are a part of the condenser that assists heat in moving away from the air conditioner which enables faster heat dispensing.

1 kW = 3412.142 BTU/hr

Air flow is a measurement of the amount of air per unit of time that flows through a particular device.

A ton is a measurement of heat transfer. One ton is equal to 12,000 BTU's(British thermal unit) per hour. It is derived from the amount of energy that it takes to melt one ton of ice in a twenty four hour period.

Energy Efficiency cooling mode value specified by manufacturer. This is the energy efficiency calculated while using the cooling mode of the air conditioner. The higher the EER rating, the more efficient the air conditioner

Energy Efficiency cooling mode computed value (This is the calculated EER value, considering the company specified data or info that is claimed by the manufacturer). This value shows the actual deviation of the EER (Calculated/ Computed) from the company specified value of EER.

1 kW = 3412.142 BTU/hr

An auto restart facility helps to restore the original setting after a power break.

The timer button on the remote automatically selects the night set mode, which prevents excessive heating/cooling of the room. The perfect temperature gives you a sound, undisturbed sleep, which keeps you healthy, fresh and ready to go the next day.

Depicts actual temperature around you

Maximum length = Maximum length allowed between indoor and outdoor unit.