Mitsubishi Split 1.25 TR Air Conditioner MSZ-EF42VEB (MUZ-EF42VEB)

Inverter AC:

An inverter air conditioner consumes much less electricity as compared to non-inverter. An inverter AC means that the compressor is powered by a variable speed drive, which enables the compressor to run at a range of speeds from slow to fast, to match the output required. Inverter air conditioners are able to vary their operating capacity. You would be really surprised to find the amount of money you can easily save by making use of this latest technology. When purchasing an inverter air conditioner.

There are different types on Inverter ACs like:

• DC Inverter AC - Converts AC to DC current and then back into AC current. Due to variable frequency, the compressor motor is able to work at variable speed and hence is more efficient that conventional non-inverter or fixed speed ACS.
• Inverter Heat Pump - It is an inverter AC which pumps out over 3 times more energy than the traditional heat pumps. It is mainly used in Acs which come with both hot and cold feature
• 3D Inverter AC - It is an inverter AC which has vents on the side that helps in removing hot air and calling the room faster
• Multi Inverter (Multi Split) - It is an inverter AC which is used in ACs which support different capacity and style indoor units for one single outdoor unit

Hot and Cold: There is only one motor for the fans blowing through the hot coils and cold coils. However, in split system air conditioning, you have two separate motors for the two fans. While this may seem to be a waste of energy, it also means that it is possible to have a different motor speed for the air handling or cooling unit. Thus, in the split system, the air handling motor has a variable speed and usually operates at a lower speed to save on energy costs. The speed can also be adjusted by the user to achieve the desired environment. A final advantage is the ability of a split system to serve as both an air conditioner in the summer months and a heater in the winter. This is accomplished by switching functions at the outside compressor which then functions as a heat pump. Generally, cassettes are provide less heat than is necessary, but they are a useful addition to other systems

Filter helps to keep the environment clean

1 kW = 3412.142 BTU/hr

Air flow is a measurement of the amount of air per unit of time that flows through a particular device.

A ton is a measurement of heat transfer. One ton is equal to 12,000 BTU's(British thermal unit) per hour. It is derived from the amount of energy that it takes to melt one ton of ice in a twenty four hour period.

This is the energy efficiency calculated while using the heating mode of the air conditioner.

Energy Efficiency cooling mode value specified by manufacturer. This is the energy efficiency calculated while using the cooling mode of the air conditioner. The higher the EER rating, the more efficient the air conditioner

Energy Efficiency cooling mode computed value (This is the calculated EER value, considering the company specified data or info that is claimed by the manufacturer). This value shows the actual deviation of the EER (Calculated/ Computed) from the company specified value of EER.

1 kW = 3412.142 BTU/hr

An auto restart facility helps to restore the original setting after a power break.

In this mode the left-right vane can be automatically controlled by remote controller. Simply use of Wide vane mode, you can easily adjust direction of airflow to reach any corner of the room.

The air outlet vane swings up and down which the airflow is spread evenly throughout the room.

The Econo mode runs the AC in economical mode thereby reducing the electricity consumption.

Maximum length = Maximum length allowed between indoor and outdoor unit.